Skip to content
TowPure logo — trailer hitch icon with the TowPure wordmark
  • Home
  • About UsExpand
    • Contact Us
  • Receiver Hitches
  • Trailer Wiring
  • Trailer Tires
  • Hitch Carriers
  • Trailer Jacks
  • Free Tools
TowPure logo — trailer hitch icon with the TowPure wordmark
Free checker

Trailer Tire Size Decoder & Wheel Fit Checker

Decode a trailer tire size, get its diameter, compare a replacement size and check rim size, lug count and bolt circle.

  • Free
  • No sign-up
  • Runs in your browser
Estimates only · data checked October 2026 · About this data

This tool only does tire geometry and compares what you type. Tire, wheel and towing ratings come from the sidewall, the wheel marking, the axle/trailer label and the manufacturer. A match here does not mean a tire or wheel is approved or safe for your trailer.

Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.

Quick answer

Matching tire and wheel rim diameters is necessary, but does not establish fit. Hub and wheel lug count, bolt circle and pilot type must also match; approved rim width and contour, ratings, offset and clearance still need manufacturer verification. Type your sidewall size below to decode it and compare a replacement. Last updated: October 2026.

How to use the trailer tire and wheel fit checker

  1. Type the current tire size exactly as it appears on the sidewall, for example ST205/75R15. Lowercase, extra spaces and a missing slash are accepted. Anything after the rim number, such as a load range letter or “107/102L”, is ignored for the geometry.
  2. Optionally, enter the wheel diameter marked on the wheel. The tool flags a match or a mismatch with the tire’s rim number.
  3. Optionally, enter the hub and wheel lug counts and both bolt circles in inches or millimeters, using the patterns stated by the axle and wheel makers or read with a bolt-circle gauge. The tool converts inches to millimeters (× 25.4) and compares the values rounded to 0.1 mm. If either bolt circle is blank, it shows “Bolt circle not checked”.
  4. Optionally, add an alternate tire size to see its diameter and the signed difference from your current tire.
  5. Optionally, copy the load range, load index and max load from each sidewall. The load index must be a whole number. The tool shows these values side by side exactly as you typed them, without rounding, and never estimates them from the size.
  6. Select Check fit, then open Show the math to see every step with your numbers filled in.

How to read a trailer tire size and calculate its diameter

Metric tire sizes follow the ISO metric designation. In ST205/75R15:

  • ST is the service prefix: ST = special trailer, LT = light truck, P = passenger car. Some sizes have no prefix.
  • 205 is the nominal section width in millimeters.
  • 75 is the aspect ratio: the sidewall height as a percentage of the width.
  • R is the construction: R = radial, D = bias (diagonal), B = belted bias.
  • 15 is the rim diameter in inches.

The load range letter and load index are separate sidewall markings. They are not part of the size, and the size alone does not tell you either one.

The overall diameter comes from that geometry. The sidewall height in millimeters is width × aspect / 100. The overall diameter in millimeters is rim × 25.4 + 2 × sidewall, because the tire has a sidewall above and below the rim. Divide by 25.4 to get inches. For ST205/75R15: 205 × 75 / 100 = 153.75 mm; 15 × 25.4 + 2 × 153.75 = 688.5 mm; 688.5 / 25.4 = 27.11 in.

To compare a replacement, the tool uses (alternate diameter − current diameter) / current diameter × 100, signed and shown to two decimals. It shows the number only and does not set an “acceptable” range.

SizeSidewall (mm)Diameter (mm)Diameter (in)vs ST205/75R15
ST205/75R15153.75688.527.110.00%
ST225/75R15168.75718.528.29+4.36%
ST175/80R13140.00610.224.02−11.37%
Worked examples calculated from the formula above. These are formula checks, not recommendations.

Trailer rim bolt pattern chart: matching the wheel to the hub

A bolt pattern has two parts: the number of lugs and the bolt circle, which is the diameter of the circle through the stud centers. Both must match between the hub and the wheel. Dexter’s applications manual adds that the wheel must match the hub’s pilot type (hub piloted or stud piloted). It also says the rim size and contour must be approved for the tire in the Tire and Rim Association Yearbook or the tire maker’s catalog.

Finding the bolt circle: use the bolt pattern stated by the axle or hub maker and by the wheel maker, or read the hub and the wheel with a bolt-circle gauge made for that lug count, following the gauge’s instructions. On a 5-lug pattern no stud sits directly across from another, so a tape measurement between studs does not read the bolt circle directly and only approximates it. Because the tool compares values to 0.1 mm, enter stated or gauge-read values rather than rough tape readings. A matching lug count and bolt circle only means the same stated pattern. It does not mean the wheel is approved for your axle.

Dexter publishes a wheel torque chart by wheel size and bolt circle code. The table below copies the codes exactly as Dexter prints them; we have not translated them into lug counts or measurements. Tighten in stages, in Dexter’s cross pattern.

Wheel size – BC codeStud1st stage (ft-lb)2nd stage (ft-lb)Final (ft-lb)
12″ – 440, 12″ – 545, 13″ – 440, 13″ – 5451/2″-2020–2535–4060–75
14″ – 545, 15″ – 545, 15″ – 655, 16″ – 655, 16.5″ – 6551/2″-2020–2550–60100–120
16″ – 865, 16.5″ – 8659/16″-1820–2550–60140–170
Source: Dexter Light Duty Axle Service Manual, p.73. Dexter lists the maximum torque for grade 8 studs (p.74) as 120 ft-lb for 1/2″-20 UNF, 170 ft-lb for 9/16″-18 UNF and 325 ft-lb for 5/8″-18 UNF.

What this tool does not check: rim width and contour approval, wheel offset, hub bore, pilot type, wheel load rating, tire load capacity, speed rating, inflation pressure, fender and frame clearance, or axle rating.

Methodology & sources

The size is trimmed and uppercased, and repeated spaces are collapsed. It is then matched to: an optional ST, LT or P prefix; a 3-digit width; a 2-digit aspect ratio, with or without a slash; an optional R, D or B; and a 2-digit rim diameter. Inch-style and flotation sizes (for example 4.80-12 or 31×10.50R15), and anything else that does not match, return “Not a metric size this tool can decode”. The tool does not guess. Values are rounded for display only (sidewall to 0.01 mm, diameter to 0.1 mm and 0.01 in, difference to 0.01%). Bolt circles are converted to millimeters and compared at 0.1 mm, so 4.5 in (114.3 mm) matches 114.3 mm but not 114.4 mm. Sidewall load values are checked but never changed: a load index must be a whole number greater than 0, and a max load must be greater than 0 and is shown with the decimals you entered. Everything runs in your browser. Nothing is stored or sent.

  • Wikipedia: Tire code: meaning of the prefix, width, aspect ratio, construction and rim fields (ISO metric designation).
  • Dexter Light Duty Axle Service Manual: passenger tire ÷ 1.10 rule for trailer use, wheel torque sequence and maximum stud torque.
  • Dexter Applications Manual (LIT-008-00): rim approval for the tire and matching the wheel to the hub.
  • Unit conversion: 1 inch = 25.4 mm, exact by definition.

Tire, wheel and towing ratings come from the sidewall, the wheel marking, the axle/trailer label and the manufacturer; this tool only does geometry. For any towing-capacity number, cite SAE J684, the hitch label or the vehicle manual, and remember that the lowest of vehicle manual, hitch label, ball mount, ball and coupler rating wins.

Last updated: October 2026

FAQ

What wheels and tires fit my trailer?

Matching tire and wheel rim diameters is necessary, but does not establish fit. Hub and wheel lug count, bolt circle and pilot type (hub piloted or stud piloted) must also match. Dexter says the rim size and contour must be approved for the tire in the Tire and Rim Association Yearbook or the tire maker’s catalog, and rim width, ratings, offset and clearance still need manufacturer verification.

What does ST205/75R15 mean?

ST means special trailer, 205 is the section width in millimeters, 75 is the sidewall height as a percentage of that width, R means radial, and 15 is the rim diameter in inches. By the ISO metric geometry, its overall diameter is 688.5 mm, or about 27.11 inches.

Can I put passenger car tires on a trailer?

Dexter’s light-duty service manual says the capacity molded into a passenger car (P) tire should be divided by 1.10 for trailer use, so a molded 1,765 lb becomes about 1,604.5 lb. For LT and ST tires, Dexter says to use the rating molded into the tire.

How do I find a 5-lug bolt circle?

Use the bolt pattern stated by the axle or hub maker and by the wheel maker, or a bolt-circle gauge made for 5-lug patterns, used according to its instructions. With five studs no stud sits directly across from another, so a tape measurement between studs only approximates the bolt circle and should not be treated as the exact pattern.

How much bigger can a replacement trailer tire be?

This tool shows the signed percentage and inch difference in overall diameter but does not set an acceptable range. Check fender and frame clearance, whether the wheel is approved for the tire, and the load rating on the new tire’s sidewall with the tire maker.

Related guides

  • Electric vs Surge Trailer Brakes: Which Is Right for Your Trailer?
  • How Do Electric Trailer Brakes Work? Magnets, Shoes and Drums Explained
  • How Do Trailer Brake Controllers Work? Gain, Output and Sensors Explained
  • How Heavy Can a Trailer Be Without Brakes? State-by-State Weight Limits
  • How to Adjust Boat Trailer Rollers for a Perfect Hull Fit
  • Trailer Leaf Spring Size Chart: Length, Eye Type and Capacity

More free tools

Ball Mount Drop and Rise Calculator

Enter receiver and coupler heights to calculate the required ball mount drop or rise in inches and millimeters.

Boat Trailer Parts Selector & Rating Checker

Enter your boat plus gear weight and the rating printed on each trailer part to see which parts are rated below your loaded weight.

Fifth Wheel / Gooseneck Pin Weight & Payload Checker

Estimate fifth wheel or gooseneck pin weight and check it, plus hitch, people and cargo, against your truck's door-jamb payload sticker.

See all free tools (14) →

  • Home
  • About Us
  • Contact Us
  • HTML SITEMAP
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclaimer
  • How We Research

Please keep in mind that we may receive commissions when you click our links and make purchases. However, this does not sway our reviews and comparisons. We try our best to keep things unbiased, in order to help you make the best choice. As Amazon Associate, we earn from qualifying purchases.

© 2026 TowPure | All Rights Reserved.

Scroll to top
  • Home
  • About Us
    • Contact Us
  • Receiver Hitches
  • Trailer Wiring
  • Trailer Tires
  • Hitch Carriers
  • Trailer Jacks
  • Free Tools
Search