Skip to content
TowPure logo — trailer hitch icon with the TowPure wordmark
  • Home
  • About UsExpand
    • Contact Us
  • Receiver Hitches
  • Trailer Wiring
  • Trailer Tires
  • Hitch Carriers
  • Trailer Jacks
  • Free Tools
TowPure logo — trailer hitch icon with the TowPure wordmark
Free checker

Fifth Wheel / Gooseneck Pin Weight & Payload Checker

Estimate fifth wheel or gooseneck pin weight and check it, plus hitch, people and cargo, against your truck's door-jamb payload sticker.

  • Free
  • No sign-up
  • Runs in your browser
Estimates only · data checked October 2026 · About this data

The lowest of vehicle manual, hitch label, ball mount, ball and coupler rating wins. Verify every figure with your truck's manual; this tool is an estimate, not an approval to tow.

Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.

Quick answer

This fifth wheel pin weight calculator estimates the king pin or gooseneck load as a share of trailer weight. It adds hitch, passenger and cargo weight to that load and compares the total with the payload on your truck’s door-jamb sticker, not the brochure maximum. The result is a clear PASS or FAIL. Last updated: October 2026.

How to use the pin weight and payload checker

  1. Choose pounds or kilograms. You can switch later, and the values you entered are converted.
  2. Enter the payload printed on your truck’s door-jamb sticker. Verify it with the truck manual.
  3. Enter the trailer weight. Use the loaded weight from a scale, or the trailer GVWR for a maximum trailer-weight scenario at the selected pin percentage. That scenario does not guarantee the maximum pin load, and loaded scale measurements take precedence.
  4. Keep the 20% pin-weight default or change it. The two source links beside the field open the documents behind it. If you have the pin weight of the trailer as currently loaded, measured on a scale, enter it in the measured pin weight field; it overrides the percentage.
  5. Enter the weight of the hitch, passengers and cargo. Cargo includes bed accessories not already counted in the sticker figure.
  6. Optionally, enter the hitch’s rated vertical (pin) load and choose your trailer coupling type.
  7. Press Check payload and read the PASS/FAIL badge, the remaining payload (or “Over by”) and the line-by-line breakdown.

How the calculation works

The calculation runs internally in pounds. Kilogram entries are converted with the exact factor 1 lb = 0.45359237 kg, and only the displayed numbers are rounded. The steps are:

  1. Pin weight = your measured loaded pin weight if you entered one, otherwise trailer weight × pin % ÷ 100.
  2. Payload used = pin weight + hitch weight + passengers + cargo.
  3. Remaining payload = sticker payload − payload used.
  4. Percent used = payload used ÷ sticker payload × 100.
  5. PASS if remaining payload is 0 or more; otherwise FAIL, shown as “Over by” the shortfall.
  6. If you entered the hitch’s rated vertical load, a pin weight above it is flagged FAIL on hitch rating. This check is separate from the payload result.
  7. The coupling type gives a compatibility note. A kingpin uses a fifth wheel hitch. A gooseneck coupler uses a gooseneck ball hitch, or a fifth wheel hitch with a gooseneck-to-fifth-wheel adapter.

Computers store decimals such as 0.1 and 0.2 with tiny binary rounding errors. So that an exact fit is not reported as a FAIL, the payload and hitch-rating comparisons treat two values as equal when they differ by no more than one trillionth of the larger value. This only removes arithmetic noise; it is not a safety margin, and any real overload, however small, still fails.

The two sources for the default percentage give different ranges. Nissan’s 2020 Towing Guide says the “5th wheel and gooseneck trailer king pin load must be kept between 15-25% of the actual trailer weight.” Dexter Axle’s applications manual (LIT-008-00) gives 15% to 20% of the trailer’s gross weight for fifth wheel and gooseneck hitches. The checker pre-fills 20%, the top of the range that both sources include, because a higher pin percentage is the more conservative assumption for a payload check. It is still an assumption: how a trailer is loaded can put a larger share of its weight on the pin than the percentage you choose.

Worked example (example numbers, not a real truck): sticker payload 2,100 lb, trailer 14,000 lb, hitch 250 lb, passengers 300 lb, cargo 200 lb.

Pin %Pin weightPayload usedResult
15%2,100 lb2,850 lbFAIL, over by 750 lb
20%2,800 lb3,550 lbFAIL, over by 1,450 lb (169.0% used)
25%3,500 lb4,250 lbFAIL, over by 2,150 lb
Hypothetical inputs to show the formula; not tied to any truck or trailer.

Where to find each number, and what is not checked

  • Truck payload: the tire and loading information sticker on the driver’s door jamb. Use this figure, not the brochure maximum, and verify it with the truck manual.
  • Trailer weight: a scale ticket for the loaded trailer, or the GVWR on the trailer’s label for a maximum trailer-weight scenario at the selected pin percentage. GVWR × pin % does not guarantee the maximum pin load; loaded scale measurements take precedence.
  • Measured pin weight: a scale reading of the pin load with the trailer loaded as you will tow it. If the trailer manufacturer publishes a pin weight, check whether it is a dry or specification figure. Such a figure describes the trailer as specified, not as you have loaded it, so do not treat it as a measured loaded pin weight or enter it in that field.
  • Hitch weight and rated vertical load: the hitch label or the hitch manufacturer’s specifications.

Nissan’s guide defines GVW as the actual scale weight of the vehicle, including passengers, cargo, fuel, hitch, tongue/king pin load and options; it must not exceed GVWR. It defines GCW as the loaded tow vehicle plus the loaded trailer; it must not exceed GCWR. The guide also says to make sure the vehicle has the payload capacity available for the trailer tongue load. This checker covers only that payload question. It does not check GCWR, axle ratings (GAWR), tow rating, or hitch, ball and coupler ratings other than the optional vertical load. Pintle hitches are a different coupling and are not covered by this checker.

Safety note: The lowest of vehicle manual, hitch label, ball mount, ball and coupler rating wins. Verify every figure with your truck’s manual; this tool is an estimate, not an approval to tow.

Methodology & sources

  • Nissan, 2020 Nissan Towing Guide: king pin load of 15-25% of actual trailer weight, plus the GVW/GCW definitions (accessed October 2026).
  • Dexter Axle, Applications Manual LIT-008-00: fifth wheel and gooseneck hitch weight of 15% to 20% of trailer gross weight (accessed October 2026).
  • Wikipedia, “Pound (mass)”: 1 lb = 0.45359237 kg exactly (accessed October 2026).
  • Wikipedia, “Tow hitch”: background reading only, cited and not copied; text licensed CC BY-SA (accessed October 2026).

All truck, trailer and hitch figures come from you; the checker does not look up any model. Last updated: October 2026.

FAQ

What pin weight percentage does the calculator use by default?

It pre-fills 20%, which sits inside both cited ranges: Nissan’s 2020 Towing Guide says 15-25% of actual trailer weight and Dexter Axle LIT-008-00 says 15% to 20%. You can edit it, and a measured loaded pin weight overrides it.

Which payload number should I enter?

Enter the payload from your truck’s door-jamb sticker, not the brochure maximum. Verify it with the truck manual.

Does a PASS mean my setup is safe or legal?

No. A PASS only means the pin weight, hitch, passengers and cargo fit within the sticker payload you entered. GCWR, axle ratings, tow rating and other hitch ratings are not checked.

What if I have a measured pin weight?

Enter the pin weight measured on a scale with the trailer loaded as you will tow it. The checker then uses that value instead of the percentage and says so in the result. A published dry or specification pin weight is not a measured loaded pin weight, so do not enter it in that field.

Does it work for pintle hitches?

No. Pintle hitches are a different coupling and are not covered by this checker.

Related guides

  • How Heavy Can a Trailer Be Without Brakes? State-by-State Weight Limits
  • Do I Need a Slider 5th Wheel Hitch? Short-Bed Cab Clearance Explained
  • Best 1 1/4 to 2 Inch Hitch Adapters

More free tools

Ball Mount Drop and Rise Calculator

Enter receiver and coupler heights to calculate the required ball mount drop or rise in inches and millimeters.

Boat Trailer Parts Selector & Rating Checker

Enter your boat plus gear weight and the rating printed on each trailer part to see which parts are rated below your loaded weight.

Flat Tow vs Tow Dolly Selector Quiz

Five-question quiz that routes you to flat towing, a tow dolly or a car trailer, with a weight check and owner's-manual check lists.

See all free tools (14) →

  • Home
  • About Us
  • Contact Us
  • HTML SITEMAP
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclaimer
  • How We Research

Please keep in mind that we may receive commissions when you click our links and make purchases. However, this does not sway our reviews and comparisons. We try our best to keep things unbiased, in order to help you make the best choice. As Amazon Associate, we earn from qualifying purchases.

© 2026 TowPure | All Rights Reserved.

Scroll to top
  • Home
  • About Us
    • Contact Us
  • Receiver Hitches
  • Trailer Wiring
  • Trailer Tires
  • Hitch Carriers
  • Trailer Jacks
  • Free Tools
Search