Tongue Jack Rating Calculator
Estimate tongue weight from trailer weight and a cited 10-15% range, then check whether your tongue jack's rating covers it.
- Free
- No sign-up
- Runs in your browser
Estimates only · data checked October 2026 · About this data
Estimate only, based on a published percentage range; it is not a measurement and does not show that a setup is safe or legal. The lowest of vehicle manual, hitch label, ball mount, ball and coupler rating wins.
Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.
Quick answer
Nissan’s 2020 Towing Guide puts 10-15% of trailer weight on the hitch for a conventional trailer, and Dexter Axle lists 10% to 14% for bumper-type hitches. Enter your loaded trailer weight and the rating printed on your tongue jack to estimate tongue weight and see whether the jack rating covers it.
How to use the tongue jack rating calculator
- Choose your units: pounds (lb) or kilograms (kg). The trailer weight and the jack rating are both entered in the unit you pick, so they are always compared like for like.
- Enter the loaded trailer weight, meaning the trailer plus everything you carry on it.
- Enter the jack rating exactly as it is printed on your tongue jack.
- Leave the tongue-weight % on the default 10-15% range from Nissan, switch to the 10-14% range from Dexter Axle, or pick “Custom %” and type your own figure if your trailer documentation gives one.
- Press Calculate. The result shows the estimated tongue weight in both units, the formula with your numbers, and whether your jack rating covers the estimate.
If you enter a custom percentage that falls outside a cited range, the result adds a short note saying so. It is a factual flag, not a recommendation. Every field is checked before anything is calculated: a blank, zero, negative or non-numeric entry shows a message next to that field instead of a result.
How the tongue weight formula works
Tongue weight is estimated as a share of the loaded trailer weight:
Tongue weight = loaded trailer weight × tongue-weight % ÷ 100
Because the published sources give a range rather than a single number, the calculator works out the tongue weight at the low end and the high end of the range you choose. The jack check then compares your jack rating with those estimates:
- Jack rating covers the estimate: the rating is equal to or higher than the high-end estimate.
- Covers the low-end estimate but is below the high-end estimate: the rating sits inside the estimated range.
- Jack rating is below the estimate: the rating is lower than even the low-end estimate.
No extra margin or safety factor is added; the check compares only the rating you enter with weight × percentage. The table below shows the formula applied to a few example trailer weights.
| Loaded trailer weight | At 10% | At 14% (Dexter upper) | At 15% (Nissan upper) |
|---|---|---|---|
| 1,500 lb | 150 lb | 210 lb | 225 lb |
| 3,000 lb | 300 lb | 420 lb | 450 lb |
| 5,000 lb | 500 lb | 700 lb | 750 lb |
The 1,500 lb × 10% = 150 lb row matches the worked example in Nissan’s 2020 Towing Guide. In kilograms, a 5,000 lb trailer is 2,268.0 kg (1 lb = 0.45359237 kg), so the same 10-15% range gives 226.8 to 340.2 kg. The lowest of vehicle manual, hitch label, ball mount, ball and coupler rating wins.
What percentage of trailer weight should be on the hitch?
The two published sources used by this calculator give slightly different ranges for conventional (bumper-pull) trailers:
- Nissan, 2020 NISSAN Towing Guide: “keep conventional trailer tongue load between 10-15% of the actual trailer weight.” This is the calculator’s default range.
- Dexter Axle, Applications Manual (LIT-008-00): hitch weight of 10% to 14% of gross trailer weight for conventional bumper-type hitches.
Both start at 10%; the upper end is 15% in the Nissan guide and 14% in the Dexter manual. Note that Nissan refers to the actual trailer weight and Dexter to gross trailer weight, which is why the calculator asks for the trailer weight as loaded. You can switch between the two ranges in the tool to see how much the upper estimate changes for your trailer. If the documentation for your vehicle or trailer gives a different figure, choose “Custom %” and enter it.
These ranges apply to conventional trailers that sit on a tongue jack. Fifth-wheel and gooseneck pin weight is a different calculation and is out of scope for this tool.
What the jack rating check does and does not tell you
The result answers one narrow question: is the number printed on your jack at least as high as the estimated tongue weight? A “covers” result does not mean a setup is safe or legal, and the estimate is not a measurement of your actual tongue weight, which depends on how the trailer is loaded.
The jack is also only one part of the setup. The lowest of vehicle manual, hitch label, ball mount, ball and coupler rating wins. Check each of those documents and labels for your own vehicle and equipment.
The calculator accepts very large values and computes them, but it does not judge whether a result is realistic for any real trailer.
Methodology & sources
- Formula: tongue weight = loaded trailer weight × tongue-weight % ÷ 100, calculated at the low and high end of the chosen range (or once for a custom %).
- Jack check: pass when the entered jack rating is greater than or equal to the high-end estimate. No margin or factor of our own is added.
- Units: the trailer weight and jack rating are entered in the same unit and compared in that unit. Converted values use 1 lb = 0.45359237 kg, the exact definition of the international avoirdupois pound.
- Rounding: comparisons use unrounded values. Results are rounded only for display: whole pounds, and kilograms to one decimal place.
- Privacy: the calculator runs entirely in your browser; nothing you enter is sent anywhere.
Sources:
- Nissan — 2020 NISSAN Towing Guide: default tongue-weight range of 10-15% of actual trailer weight, quoted verbatim. Accessed October 2026.
- Dexter Axle — Applications Manual (LIT-008-00): hitch weight of 10% to 14% of gross trailer weight for conventional bumper-type hitches. Accessed October 2026.
Last updated: October 2026
FAQ
What percentage of trailer weight should be on the hitch?
Nissan’s 2020 Towing Guide says to “keep conventional trailer tongue load between 10-15% of the actual trailer weight.” Dexter Axle’s applications manual (LIT-008-00) gives 10% to 14% of gross trailer weight for conventional bumper-type hitches.
How do I calculate tongue weight from trailer weight?
Multiply the loaded trailer weight by the tongue-weight percentage and divide by 100. For example, 5,000 lb × 15 ÷ 100 = 750 lb.
What does “Jack rating covers the estimate” mean?
The jack rating you entered is equal to or higher than the estimated tongue weight. It compares only those two numbers and does not mean a setup is safe or legal. The lowest of vehicle manual, hitch label, ball mount, ball and coupler rating wins.
Why does the result show a range?
The published sources give a percentage range, so the calculator shows the tongue weight at both ends. The pass/fail check uses the high end; pick “Custom %” to enter a single percentage.
Can I enter weights in kilograms?
Yes. Choose kilograms and enter both the trailer weight and the jack rating in kg; conversions use 1 lb = 0.45359237 kg.
Related guides
- Electric vs Surge Trailer Brakes: Which Is Right for Your Trailer?
- How Do Electric Trailer Brakes Work? Magnets, Shoes and Drums Explained
- Are Trailer Hitch Locks Worth It? What They Stop and What They Don’t
- How Heavy Can a Trailer Be Without Brakes? State-by-State Weight Limits
- Boat Trailer Winch Size Guide: Capacity by Boat Weight and Ramp Angle
- Is a Trailer Breakaway Kit Required? Rules, Weights and How It Works
More free tools
Ball Mount Drop and Rise Calculator
Enter receiver and coupler heights to calculate the required ball mount drop or rise in inches and millimeters.
Boat Trailer Parts Selector & Rating Checker
Enter your boat plus gear weight and the rating printed on each trailer part to see which parts are rated below your loaded weight.
Fifth Wheel / Gooseneck Pin Weight & Payload Checker
Estimate fifth wheel or gooseneck pin weight and check it, plus hitch, people and cargo, against your truck's door-jamb payload sticker.
