What Size Trailer Hitch Do I Need? Class Selector
Enter loaded trailer weight, tongue weight and your ratings to get the minimum hitch class (I–IV) and see which rating sets your limit.
- Free
- No sign-up
- Runs in your browser
Estimates only · data checked October 2026 · About this data
Screening aid only, not a towing approval. The lowest of vehicle manual, hitch label, ball mount, ball and coupler rating wins. This tool is a screening aid, so confirm every rating on the hitch label and in your vehicle manual before towing.
Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.
Quick answer
What size trailer hitch do you need? Pick the lowest hitch class whose maximum towing weight covers your loaded trailer: Class I to 2,000 lb, Class II to 3,500 lb, Class III to 5,000 lb, Class IV to 10,000 lb. Then the lowest of your vehicle, hitch, ball mount, ball and coupler ratings still wins. This is a screening aid, not a towing approval.
How to use the trailer hitch size calculator
- Enter the loaded trailer weight (gross trailer weight, GTW) in pounds. That is the trailer plus everything on it, not the empty weight.
- Enter the tongue weight you measured. The tool does not estimate it. If you do not know it, measure it or check the trailer’s documentation.
- Enter the tow rating from your vehicle owner’s manual.
- Optionally add the vehicle’s maximum tongue-weight rating, the trailer-weight and tongue-weight ratings on your hitch label, and the ratings marked on your ball mount, ball and coupler.
- Select “Find my hitch class”. You get the minimum class, the trailer-weight and tongue-weight limits, the component that sets each limit, and a bar for every rating you entered. The lowest bar is labelled “Sets your limit”.
The tool never looks up a vehicle or a hitch. It only compares the numbers you type in. Any rating you leave blank is not checked, and the result says which ones were skipped. Nothing you enter is stored or sent.
How the hitch class selector works
The selector uses one rule: the minimum class is the lowest class whose maximum towing weight is greater than or equal to your loaded trailer weight. If your trailer weighs more than 10,000 lb, the result reads “Exceeds the highest class in the table”, because the SAE J684 classes cover applications under 10,000 lb. In that case, consult the hitch and vehicle manufacturers.
The class limits come from Table 1, “Various Types of Hitch Receivers”, in a 2000 U.S. Department of Transportation notice that cites SAE J684 (6/98). The Dexter Axle Trailer Applications Manual lists the same four limits.
| Class | Max towing weight | Duty | Hitch system type | Source |
|---|---|---|---|---|
| Class I | 2,000 lb (907 kg) | Light | Weight carrying | SAE J684 via USDOT 2000, Table 1 |
| Class II | 3,500 lb (1,588 kg) | Medium | Weight carrying | SAE J684 via USDOT 2000, Table 1 |
| Class III | 5,000 lb (2,268 kg) | Heavy | Weight carrying | SAE J684 via USDOT 2000, Table 1 |
| Class IV | 10,000 lb (4,536 kg) | Heavy | Weight distributing | SAE J684 via USDOT 2000, Table 1 |
Here are some worked examples. A 1,800 lb or exactly 2,000 lb trailer needs at least Class I. At 2,001 lb you move up to Class II. A 4,200 lb trailer needs Class III, and a 7,500 lb trailer needs Class IV.
The source table has no tongue-weight column, no receiver-size column and no weight-distributing column, so the tool does not print those values per class. Read your hitch label for the receiver opening and the tongue-weight rating. Class V is not offered because it is not part of the cited SAE J684 table.
Why the lowest rating wins (trailer hitch weight calculator)
A hitch class only describes the hitch receiver. Your tow is limited by every part in the chain: vehicle, hitch, ball mount, ball and coupler. The lowest of vehicle manual, hitch label, ball mount, ball and coupler rating wins. That is why this trailer hitch weight calculator shows one bar per rating and highlights the lowest one, rather than only naming a class.
Both manufacturers cited here state the same idea. Nissan’s 2020 towing guide says: “DO NOT exceed any of the individual vehicle weight ratings (GVWR, GAWR, GCWR, etc.), regardless of trailer or hitch type.” Dexter Axle’s applications manual says: “The Gross Axle Weight Rating of the running gear will be based on the lowest rated component.”
A higher hitch class does not raise the vehicle’s rating. If your vehicle tow rating is below your trailer weight, the tool still shows the minimum class, but it names the vehicle as the limit.
Where to find each rating
- Vehicle tow rating and tongue-weight rating: your vehicle owner’s manual or the maker’s towing guide for your model year.
- Hitch rating and receiver size: the label on the hitch receiver, which states its trailer-weight and tongue-weight ratings.
- Ball mount, ball and coupler: the rating marked on each part or given in its documentation.
- Tongue weight: measure it with the trailer loaded as you will tow it, or check the trailer’s documentation.
Methodology & sources
The method works in three steps. First, the minimum class is the lowest class with a maximum towing weight of at least your GTW. Second, the trailer-weight limit is the minimum of the vehicle tow rating, that class’s table limit, and any hitch label, ball mount, ball or coupler ratings you entered. Third, the tongue-weight limit is the minimum of any vehicle or hitch label tongue ratings you entered.
Your GTW and tongue weight are then compared to those limits. The status reads either “Within all entered ratings” or “Exceeds:” followed by each component that falls short. Kilogram figures use 1 lb = 0.45359237 kg.
We re-check the class table against its source at least once a year. The lowest of vehicle manual, hitch label, ball mount, ball and coupler rating wins. This tool is a screening aid, so confirm every rating on the hitch label and in your vehicle manual before towing.
- USDOT/NHTSA, Federal Register Vol. 65 No. 186, 25 Sep 2000, FR Doc 00-24584: Table 1 hitch classes, citing SAE J684 (6/98). Accessed October 2026.
- Dexter Axle, Trailer Applications Manual LIT-008-00: class cross-check and the lowest-rated component rule. Accessed October 2026.
- Nissan, 2020 Nissan Towing Guide: the instruction not to exceed individual vehicle weight ratings. Accessed October 2026.
- Wikipedia, “Tow hitch” (CC BY-SA): further reading only, nothing copied.
- Wikipedia, “Pound (mass)”: the pound-to-kilogram constant.
Last updated: October 2026
FAQ
What size trailer hitch do I need for a 5,000 lb trailer?
Class III is the lowest class in the SAE J684 table summarized by USDOT in 2000 with a 5,000 lb maximum towing weight. Your vehicle, hitch label, ball mount, ball or coupler rating can still be lower, and the lowest rating wins.
Does a higher hitch class raise my vehicle’s towing capacity?
No. A higher hitch class does not raise the vehicle’s rating. The vehicle maker’s tow rating in the owner’s manual is still a limit.
What receiver size goes with each hitch class?
This tool does not print a receiver size per class because the cited source table does not list receiver sizes. Read the label on your hitch receiver to confirm the opening size.
Can the tool estimate my tongue weight?
No. Enter the tongue weight you measured. If you do not know it, measure it or check the trailer’s documentation.
What if my loaded trailer weighs more than 10,000 lb?
The tool reports that the weight exceeds the highest class in the table, because the SAE J684 classes cover applications under 10,000 lb. Consult the hitch and vehicle manufacturers.
Related guides
- How to Measure Hitch Ball Height (and What Height Your Trailer Needs)
- What Hitch Ball Size Do U-Haul Trailers Need? Size by Trailer Type
- What Drop Hitch Do I Need for a Lifted Truck? Find Your Exact Drop
- Are Trailer Hitch Locks Worth It? What They Stop and What They Don’t
- Trailer Leaf Spring Size Chart: Length, Eye Type and Capacity
- How to Load a Boat on a Trailer by Yourself Without a Spotter
More free tools
Ball Mount Drop and Rise Calculator
Enter receiver and coupler heights to calculate the required ball mount drop or rise in inches and millimeters.
Boat Trailer Parts Selector & Rating Checker
Enter your boat plus gear weight and the rating printed on each trailer part to see which parts are rated below your loaded weight.
Fifth Wheel / Gooseneck Pin Weight & Payload Checker
Estimate fifth wheel or gooseneck pin weight and check it, plus hitch, people and cargo, against your truck's door-jamb payload sticker.
