Do You Need a Supplemental Braking System for Flat Towing? Laws and Options

You may need a supplemental braking system when flat towing; requirements depend on your route, towed vehicle’s weight, and brake configuration.
Wyoming and Kansas require combinations to stop within 40 feet from 20 mph under conditions, while New Jersey has trailer-brake and breakaway rules.
Even where a system isn’t required, added weight can overwhelm your RV’s brakes.
Check your manuals, verify compatibility, and test before each trip.
The details below can help you choose and comply.
State-by-State Braking Requirements
Flat-towing brake laws vary by state, so check the rules for every jurisdiction on your route before you travel.
Wyoming and Kansas use a performance test: your vehicle combination must stop within 40 feet from 20 mph on a level, dry, smooth, hard surface using service brakes. Missouri doesn’t broadly require an independent system for every towed setup, though fifth-wheel and kingpin configurations need brakes.
Delaware requires brakes that control movement and stop and hold the towing vehicle and trailer, plus two separate ways to apply them. New Jersey has stricter rules: brakes must operate in synchronism with the tow vehicle, and trailers or semitrailers over 3,000 pounds need brakes on all wheels. It also limits unbraked trailer weight to 40% of the towing vehicle’s gross weight.
Breakaway Switch Requirements
Beyond ordinary braking rules, many jurisdictions require a breakaway switch that automatically applies the towed vehicle’s brakes if it separates from your tow vehicle. Don’t assume your supplemental braking system includes a compliant switch; check your equipment and the rules where you travel.
New Jersey, for example, requires every trailer and semitrailer to brake automatically upon separation. Its rules also require the breakaway system to stop and hold the vehicle for an adequate period. Braking effort must occur in approximate synchronism with the towing vehicle; however, the rear-most effort may apply first.
If your state or province uses a star indicator for breakaway requirements, you’ll generally need to meet the same vehicle-weight thresholds that trigger its supplemental-brake rules. Verify current requirements with the relevant transportation authority, then test the switch according to the manufacturer’s instructions before each trip. Don’t tow with a damaged or disconnected switch.
Braking Distance With Added Weight
Adding a towed vehicle increases the mass your RV’s brakes must slow, so you’ll typically need more distance to stop.
That added mass can determine whether you meet a legal stopping standard. Some jurisdictions require your RV and toad to stop from a specified speed within a set distance. Wyoming and Kansas, for example, require stopping within 40 feet from 20 mph on a level, dry, smooth, hard surface.
Inadequate brakes may let the toad’s weight push you past that limit. Check your state’s rules and any weight threshold for supplemental brakes; exceeding an exemption can make added braking necessary for compliance and safer deceleration. Even a few feet matter, and repeated braking on descents can increase fade risk when road margins are already tight.
Brake Buddy vs. Air Force One
Brake Buddy gives you portable, plug-and-play braking with minimal installation, while Air Force One offers an integrated setup and a proportional braking feel. Your option depends on your coach, towing frequency, and whether you prefer daily setup or a more involved installation.
Compare both systems’ fit and operation carefully to ensure your towed vehicle brakes safely and reliably.
Brake Buddy Advantages
If you want to avoid permanent modifications, a Brake Buddy offers a practical alternative to Air Force One: the portable unit sits on the toad’s floor, attaches to the brake pedal, and plugs in. You can switch it between tow vehicles without repeating installation work, making it useful when your setup changes.
Each trip, place the unit, secure its pedal connection, plug it in, then adjust and test operation before driving. That routine takes time and requires storage space.
| Consideration | Brake Buddy | Practical effect |
|---|---|---|
| Installation | Portable; no permanent changes | Less setup work upfront |
| Daily use | Place, connect, plug, test | Allow time and storage |
Choose it for flexibility, but never skip connection checks or functional tests; safe braking depends on correct setup before every trip.
Air Force One Advantages
For a streamlined setup, Air Force One integrates with the braking system after installation, so you typically won’t need to place a unit on the toad’s floor or attach a pedal box before each trip. Once installed, its components remain in place, so you connect the coach and toad rather than position a floor unit.
You’ll still need to perform prescribed checks and confirm that connections are secure before moving. Designed for an air-brake-equipped coach and toad, Air Force One applies proportional braking through the coach’s braking system. Its response can feel natural and coordinated.
Follow installation and operating instructions, and test the system before every trip; integration doesn’t remove your responsibility to verify operation. Have an installer make and inspect permanent connections.
Choosing Between Systems
Choosing between Brake Buddy and Air Force One comes down to how you travel and how much installation you want. Choose Brake Buddy if you want minimal permanent modifications or may switch between towed vehicles. Each travel day, you’ll place it on the floor in front of the driver’s seat, attach it to the brake pedal, plug it in, and position, adjust, and test it. You’ll also need room to store it and must remove it after travel.
Choose Air Force One if you travel and prefer an integrated system. Its installation on both coach and toad means it’s ready without daily setup. With an air-brake RV, it can deliver proportional braking that feels seamless and natural. Either way, confirm installation and operation before a trip.
Tow-Vehicle Brake Compatibility
Your tow vehicle’s brakes and your toad’s supplemental system must work together to stop the full combination within your state’s limits. Check whether your setup uses hydraulic or air brakes, since the supplemental system must match the tow vehicle’s braking signals and operation.
Before towing, verify your vehicle requirements and confirm the complete setup meets applicable braking and breakaway rules.
Brake System Compatibility
Because a supplemental braking system operates the towed vehicle’s service brakes, compatibility depends on how it applies them and how well they respond.
A proportional unit matches toad braking force to your coach’s; an on/off unit applies preset force. Choose the approach suited to your setup and tested stopping needs.
Some systems don’t need electricity, simplifying power compatibility. For a pedal-mounted unit, check its hardware fits your toad’s pedal and won’t restrict normal travel.
Before buying, verify installation requirements, power needs, and any coach-to-toad connections.
Test the combination safely; confirm the toad’s brakes respond promptly and consistently. Your setup must provide adequate combined stopping performance and meet stopping-distance rules in every state you travel through. Consult the system maker or qualified installer if fit or operation is uncertain.
Hydraulic and Air Brakes
After checking how the toad’s brakes respond, confirm that the supplemental system matches your coach’s brake type.
Gas coaches use portable hydraulic systems, while diesel pushers with air brakes need an air-compatible setup such as Air Force One. If your coach has air brakes, this system connects to the coach’s air braking and applies the toad’s brakes proportionally, so both slow together.
Hydraulic-brake coaches often use portable units such as Brake Buddy, which sits between the driver’s seat and pedal without air-system integration. Don’t choose by convenience alone: a mismatch can weaken braking coordination and stopping effectiveness. Even if laws specify stopping distance, your supplemental system must work with your coach’s hydraulic or air brakes to meet performance safely.
Check Vehicle Requirements
Before choosing a supplemental braking system, check that it matches your motorhome’s brake type and can send the right braking signal to the towed vehicle.
Confirm your coach’s system uses air brakes or hydraulic brakes; many units work only with particular setups. Then verify how the system activates your toad’s brakes. A portable pedal-actuated unit must fit the towed vehicle’s pedal geometry and operate its mechanism reliably; don’t assume every pedal responds alike.
If your motorhome has air brakes, an Air Force One-style system can connect to the coach’s air braking for proportional response, but confirm compatibility and installation requirements before purchase.
Finally, check local stopping-distance rules for connected vehicles. Your towing setup alone doesn’t prove compliance: confirm the equipment works with your coach’s brakes and toad’s hardware.
Real-World Towing Scenarios
A lightweight toad may seem exempt from supplemental braking, but weight and stopping-performance rules can make that assumption unsafe. If you’re flat towing near the common 3,000-pound threshold, check state weight limits and stopping-distance standards; “light” isn’t a legal category.
Wyoming and Kansas require vehicle combinations to stop within 40 feet from 20 mph on level, dry, hard surfaces. A fully loaded toad without its own brakes may miss that test.
Missouri generally doesn’t require independent trailer braking except certain fifth-wheel or kingpin setups, yet flat-tow compliance may depend on destination rules and classification. New Jersey requires all-wheel brakes on trailers over 3,000 pounds, automatic breakaway application, and synchronized braking.
A 2,700-pound toad may be borderline; weigh it loaded and verify state rules on your route.
Brake-System Warranty Impacts
Because warranty coverage often depends on how you install and use a supplemental brake, follow the manufacturer’s instructions from the start.
Electrical or proportional units, including Blue Ox Patriot, may require specified wiring and pedal interfaces. Integrated systems may demand exact routing and fuse ratings; unauthorized installation or tow-bar harness changes can void coverage. Compare terms: portable units may treat pedal-adapter wear differently from integrated Air Force One systems.
Stay within rated vehicle weight and actuation limits; exceeding either can restrict or cancel coverage. Keep purchase and installation records; repeat calibration and testing after setup changes to document compliance and support claims. Check whether repairs require authorized service, and get written approval before changing wiring, plumbing, adapters, or other brake components outside approved instructions first.
Assuming Brakes Engage Automatically
After confirming your supplemental braking system meets its installation and warranty requirements, don’t assume automatic engagement alone makes your setup compliant. Automatic actuation can satisfy requirements that brakes apply upon breakaway, but the system must do more than switch on: it must help control and stop your combination. In New Jersey, braking should occur in approximate synchronism with the tow vehicle’s effort; rear-most brakes may apply first.
- Verify brakes engage on breakaway and coordinate with the coach’s braking effort.
- Test against stopping-distance rules; some require 40 feet from 20 mph.
- Confirm the system can stop and hold the combination, as Delaware requires.
- Check weight thresholds: New Jersey requires all-wheel braking above 3,000 pounds and limits unbraked trailer weight to 40% of tow-vehicle gross weight.
Check Your Owner’s Manual
Before choosing a supplemental braking system, check both your motorhome’s and towed vehicle’s owner’s manuals.
They may specify whether flat towing requires or recommends supplemental braking based on braking capacity and towing limits. Check that your vehicle can travel on all four wheels, and note any restrictions on disabling brakes, lubrication, or operation.
Compare your toad’s weight with any stated threshold; many jurisdictions use limits around 3,000 pounds, but rules and vehicle guidance vary.
Follow the manual’s setup instructions. Position a portable unit at the pedal area as directed, or have an integrated system installed as specified. Don’t assume a device works just because it’s connected.
Test the braking and breakaway functions as instructed before travel. This helps meet stopping and control expectations on road.
Conclusion
Before you flat tow, check your state’s braking and breakaway rules, then confirm your vehicle manuals allow your chosen setup. Don’t assume your towed vehicle’s brakes will engage automatically or that your tow vehicle can handle the added stopping load.
Choose a compatible supplemental system, install it correctly, and test it before every trip. If you’re unsure, ask a qualified installer. The right setup helps you stay compliant, protect your equipment, and stop safely when conditions change.






