Skip to content
TowPure logo — trailer hitch icon with the TowPure wordmark
  • Home
  • About UsExpand
    • Contact Us
  • Receiver Hitches
  • Trailer Wiring
  • Trailer Tires
  • Hitch Carriers
  • Trailer Jacks
  • Free Tools
TowPure logo — trailer hitch icon with the TowPure wordmark
Free chart

Trailer Axle, Hub & Wheel Bearing Size Chart

Find sourced Dexter hub rows, bearing cones, races, bore dimensions and applicable seal kits by capacity, brake size, bolt count or part number.

  • Free
  • No sign-up
  • Runs in your browser
Estimates only · data checked October 2026 · About this data

Reference only. Confirm stamped bearing, race and seal numbers or axle documentation before ordering. Dexter lists K71-302-00 for the 5-bolt 10 x 1 1/2 in hub; the 4-bolt 2.8K seal is not verified here.

Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.

Quick answer

This trailer wheel hub size chart matches sourced Dexter hub rows to bearing cones, cups and dimensions, plus Dexter seal kits where verified. Filter by capacity, brake size, bolt count or part number; the seal for a 4-bolt 2.8K hub requires separate verification.

How to use the trailer hub and bearing chart

  1. Find the rated capacity on the axle tag and select it under Axle capacity. Capacity is per axle, not the combined rating of a tandem-axle trailer.
  2. If known, select the Brake drum size. Dexter expresses this as drum diameter by shoe width, such as 10″ x 2 1/4″.
  3. Select the number of Wheel bolts. The source chart verifies bolt count, not the bolt-circle diameter, so this is not a complete wheel bolt-pattern measurement.
  4. Alternatively, enter at least three characters from a bearing cone, cup or Dexter seal kit number. Examples include L44649, L68111, 25580 and K71-305-00.
  5. Choose inches or millimeters and select Find bearings. The first match appears in detail, while the table contains every matching source row.
  6. Select Print / save as PDF to open your browser’s print dialog. Choose Save as PDF if your browser or operating system provides that option.

How the bearing and hub matching method works

This is a source-table lookup rather than a capacity formula. Dexter’s Bearing Replacement Chart connects an axle capacity, brake size and hub bolt count to an inner and outer bearing pair. The tool filters those published rows without estimating combinations that are absent from the chart.

Each bearing pair contains a cone and cup. The cone is the inner ring and roller assembly that fits on the spindle. Its bore corresponds to the spindle diameter at that bearing seat. The cup, often called the race, is pressed into the hub; its outside diameter corresponds to the hub bore where the cup is installed. Timken’s published part pages provide the dimensions shown by the tool.

The tool uses the exact conversions 1 lb = 0.45359237 kg and 1 in = 25.4 mm. Where Timken supplied a millimeter dimension, the chart retains that published value rather than replacing it with a less precise rounded estimate.

Brake / hub rowAxle capacityInner cone / cupOuter cone / cupInner cone bore
7″ x 1 1/4″, 4 or 5 bolt2KL44649 / L44610L44649 / L446101.0625 in
10″ x 2 1/4″, 4, 5 or 6 bolt3.5K; 4K (10F)L68149 / L68111L44649 / L446101.3775 in
12″ x 2″, 6 bolt5.2K25580 / 25520LM67048 / LM670101.7500 in
Example source rows from Dexter’s bearing chart, with cone bores from Timken.

Trailer axle size chart, hub selection and printable bearing results

For trailer axle size chart and hub selection work, begin with the axle tag rather than the trailer’s advertised payload. Dexter’s cited light-duty rows cover capacities from 2K through 8K, but capacity alone is not always enough to identify a hub. The same capacity can appear with different bolt counts or bearing combinations.

For example, Dexter lists two 6K configurations in the supplied data. The 6-bolt 12″ x 2″ row uses a 15123 outer cone with a 15245 cup, while the 8-bolt row uses a 14125A outer cone with a 14276 cup. Both use a 25580 inner cone and 25520 inner cup. That is why the old bearing numbers, brake dimensions and bolt count should be checked together.

Seal applicability requires the same care. Dexter’s seal reference lists K71-302-00 for the 10″ x 1 1/2″ 5-bolt hub. The bearing chart also contains a combined 4- or 5-bolt 2.8K row, but the supplied seal row does not verify K71-302-00 for its 4-bolt version. Therefore, the tool labels K71-302-00 as verified for the 5-bolt hub only when showing the combined row. If you explicitly select four bolts, it reports that the seal is not verified instead of assigning K71-302-00.

The 12″ x 2″ grease seal result also depends on the seal journal and build date. Dexter identifies K71-304-00 for axles prior to October 1997 with a 2.12 in seal journal, and K71-305-00 for axles after October 1997 with a 2.25 in journal. The tool displays the cutoff and both journal dimensions directly in the result. Dexter lists K71-386-00 for the applicable oil configuration. These are Dexter kit numbers, not universal seal cross-references.

If you need a trailer wheel bearing size chart PDF, apply the relevant filters first and then use the tool’s Print / save as PDF control. The printed result contains the filtered chart rather than an unrelated full catalog. Browser print layouts vary, but modern browsers commonly provide a Save as PDF destination.

This chart intentionally leaves out unverified information. It does not assign spindle names such as #84 or BT8, identify idler, hydraulic or disc hub variants, provide stud diameters, or claim compatibility with Lippert and other axle manufacturers. It also does not provide third-party seal cross-references. Measure and verify those details separately when they affect the replacement part.

Methodology & sources

The axle-capacity, brake-size, bolt-count and bearing mappings come from Dexter’s Light Duty Service Manual. Bearing cone bores, cup outside diameters and part widths come from Timken CAD part pages for the corresponding industry part numbers. A row was included only when the supplied source data supported it.

  • Dexter Axle — Light Duty Service Manual: Bearing Replacement Chart on page 79 and Seal Replacement Reference on page 77.
  • The Timken Company — single cone CAD part pages: cone bore and width dimensions.
  • The Timken Company — single cup CAD part pages: cup outside diameter and width dimensions.
  • Wikipedia — Pound (mass): exact pound-to-kilogram conversion.
  • Wikipedia — Inch: exact inch-to-millimeter conversion.

Dexter marks the 12″ x 2″ 6-bolt 6K bearing row with an asterisk. Because the associated footnote was not reproduced in the supplied extracted text, the tool preserves the asterisk and directs users to the Dexter manual rather than inferring its meaning. Last updated: October 2026.

FAQ

What bearings does a 3,500 lb trailer axle use?

In Dexter’s bearing replacement chart, the 3.5K axle with a 10″ x 2 1/4″ brake uses an L68149 inner cone with an L68111 cup and an L44649 outer cone with an L44610 cup.

What is the difference between a bearing cone and a cup (race)?

The cone is the inner ring with the rollers that slides onto the spindle; the cup, or race, is the outer ring pressed into the hub. They are paired by part number, such as L44649 with L44610.

What does the cone bore tell me?

The cone bore is the bearing’s inside diameter, so it corresponds to the spindle diameter at that bearing seat. For example, an L68149 cone has a 1.3775 in (34.988 mm) bore.

Why does the 12″ x 2″ brake list two seal kits?

Dexter identifies a 2.12 in seal journal prior to October 1997 and a 2.25 in journal after October 1997. The listed grease seal kits are K71-304-00 for the earlier journal and K71-305-00 for the later journal.

Can I download the chart as a PDF?

Yes. Filter the chart, select Print / save as PDF, and then choose Save as PDF in your browser’s print dialog.

Related guides

  • Why Do Trailer Wheel Bearings Fail? Water, Heat and Bad Grease
  • How to Measure a Trailer Axle: Hub Face, Spring Center and Capacity
  • How Often Should Trailer Bearings Be Greased? Mileage and Season Schedule
  • Boat Trailer Maintenance Checklist: Bearings, Rollers, Winch and Lights

More free tools

Ball Mount Drop and Rise Calculator

Enter receiver and coupler heights to calculate the required ball mount drop or rise in inches and millimeters.

Boat Trailer Parts Selector & Rating Checker

Enter your boat plus gear weight and the rating printed on each trailer part to see which parts are rated below your loaded weight.

Fifth Wheel / Gooseneck Pin Weight & Payload Checker

Estimate fifth wheel or gooseneck pin weight and check it, plus hitch, people and cargo, against your truck's door-jamb payload sticker.

See all free tools (14) →

  • Home
  • About Us
  • Contact Us
  • HTML SITEMAP
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclaimer
  • How We Research

Please keep in mind that we may receive commissions when you click our links and make purchases. However, this does not sway our reviews and comparisons. We try our best to keep things unbiased, in order to help you make the best choice. As Amazon Associate, we earn from qualifying purchases.

© 2026 TowPure | All Rights Reserved.

Scroll to top
  • Home
  • About Us
    • Contact Us
  • Receiver Hitches
  • Trailer Wiring
  • Trailer Tires
  • Hitch Carriers
  • Trailer Jacks
  • Free Tools
Search