Skip to content
TowPure logo — trailer hitch icon with the TowPure wordmark
  • Home
  • About UsExpand
    • Contact Us
  • Receiver Hitches
  • Trailer Wiring
  • Trailer Tires
  • Hitch Carriers
  • Trailer Jacks
  • Free Tools
TowPure logo — trailer hitch icon with the TowPure wordmark
Free calculator

Trailer Axle Position & Axle Weight Calculator

Find an axle position for a target tongue weight, or calculate tongue and axle-group loads for an existing trailer layout.

  • Free
  • No sign-up
  • Runs in your browser
Estimates only · data checked October 2026 · About this data

Estimates use static moment balance only. Confirm actual tongue and axle loads on a scale and follow the ratings and instructions supplied by your axle, tire, hitch and trailer manufacturers.

Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.

Quick answer

A trailer axle position calculator finds the axle center with B = A ÷ (1 − tongue % ÷ 100), where A is the hitch-to-loaded-center-of-gravity distance. Enter your trailer and load layout to find the axle position, or calculate tongue and axle-group loads for an axle already fitted.

How to use the trailer axle position calculator

  1. Select US units for pounds and inches or metric units for kilograms and millimeters. If you change units after entering values, the calculator converts the values using the exact conversion factors listed below.
  2. Choose whether you want to find an axle position for a target tongue weight or calculate the loads for a known axle position.
  3. Select the hitch type. Dexter provides different recommended hitch-weight ranges for bumper-pull trailers and fifth wheel or gooseneck trailers.
  4. Enter the tongue length from the coupler to the front of the box, followed by the box or deck length.
  5. Enter the empty trailer weight. If you know its center of gravity, enter that position measured from the box front. Otherwise, leave the field blank to assume a uniform deck with its center of gravity at the midpoint.
  6. Add each load item. Enter the item’s weight and the position of its center, measured from the front of the box or deck.
  7. In axle-position mode, enter the desired tongue-weight percentage. In known-position mode, enter the distance from the coupler to the center of the axle or axle set.
  8. Select a single or tandem axle. Tandem spacing is used to place the two axles on the diagram, but the calculator does not estimate how the axle-group load divides between them.
  9. Optionally enter each axle’s rating, the number of tires and each tire’s load rating. The calculator compares the axle-group load with the combined capacities.

The results include the loaded center of gravity, axle center from the coupler and box front, tongue weight, axle-group load and a side-view diagram. Warnings identify tongue weight outside Dexter’s range, an axle position outside the deck, or an axle-group load above an entered axle or tire capacity.

The axle-position formula and moment-balance method

The calculator follows the method in Dexter Axle’s Trailer Applications Manual, LIT-008-00, under “Determining Dimensional Requirements.” Dexter defines A as the distance from the hitch center to the trailer’s loaded center of gravity and B as the distance from the hitch center to the center of the axle set.

First, the calculator finds the loaded center of gravity by adding the moment of every entered weight about the coupler and dividing by total loaded weight:

A = sum of (weight × distance from coupler) ÷ total weight

For a target tongue-weight percentage, the running gear carries the remaining percentage. If the tongue should carry 12%, the axle group should carry 88%, or 0.88 of the total. The axle-center formula is therefore:

B = A ÷ (1 − tongue percentage ÷ 100)

When the axle position is already known, static moment balance gives the axle-group load and tongue load:

Axle-group load = total weight × A ÷ B
Tongue weight = total weight − axle-group load

ExampleA: hitch to CGTongue targetB: hitch to axle centerCalculated loads
4,000 lb bumper-pull120 in12%136.4 in480 lb tongue; 3,520 lb axle group
Fifth wheel180 in20%225.0 in20% hitch; 80% running gear
Known axle position120 inCalculated136.4 inAbout 481 lb tongue on a 4,000 lb trailer
Examples from the static moment-balance formulas. The known-position example differs slightly because 136.4 in is a rounded axle position.

In the first example, B = 120 ÷ 0.88 = 136.36 inches, displayed as 136.4 inches. The target tongue load is 4,000 × 0.12 = 480 pounds, leaving 3,520 pounds on the axle group. Dexter notes that the “center of axle” on a Torflex axle is the center of the spindle.

Using it as a trailer axle weight calculator tool

Choose the known-position mode to use this as a trailer axle weight calculator tool. It applies the lever rule to the axle position and loaded center of gravity, then reports the static load on the hitch and the complete axle group. Moving cargo toward the coupler generally increases tongue weight, while moving cargo rearward generally reduces it.

Dexter recommends placing 10% to 14% of the loaded weight on the hitch for a conventional bumper-type trailer. Its range for a fifth wheel or gooseneck is 15% to 20%. Nissan’s 2020 towing guide provides comparison ranges of 10–15% for conventional trailers and 15–25% for fifth wheel and gooseneck trailers. The calculator uses Dexter’s ranges for its status warning because Dexter is the trailer-design source for the axle-position method.

The percentage check uses the unrounded result. For example, a calculated value of 9.96% is below Dexter’s 10% bumper-pull minimum even though it displays as 10.0%. If the axle center is ahead of the loaded center of gravity, the formula produces a negative tongue weight, meaning the trailer would try to lift the hitch rather than press down on it.

Optional capacity checks compare the entire axle-group load with the combined entered ratings. For a tandem trailer, combined axle capacity is the rating of each axle multiplied by two. Combined tire capacity is each tire’s load rating multiplied by the entered number of tires. Equality is not treated as an overload, and comparisons use unrounded calculated values.

The tool does not estimate the load carried by each individual axle in a tandem group. That division depends on the suspension and equalizer behavior, for which no verified calculation method is included here. Dexter also cautions that loads concentrated at the ends can affect handling even when the hitch carries the recommended proportion. Confirm the finished trailer’s actual loads on suitable scales.

Methodology & sources

  • Dexter Axle – Trailer Applications Manual (LIT-008-00): axle-position procedure, running-gear and hitch-load proportions, Torflex axle-center definition, and the caution about loads concentrated at the ends.
  • Nissan 2020 Towing Guide: comparison guidance of 10–15% tongue weight for conventional trailers and 15–25% for fifth wheel and gooseneck trailers.
  • Wikipedia – Pound (mass): the exact conversion 1 lb = 0.45359237 kg.
  • Wikipedia – Inch: the exact conversion 1 in = 25.4 mm.

The calculations use static moment equilibrium about the hitch and no external weight or trailer-specification dataset. Unit changes retain full-precision converted inputs for calculations. Distances and percentages are rounded to one decimal place for display, displayed weights and capacities are rounded to whole units, and range and capacity checks use unrounded calculated values. Last updated: October 2026.

FAQ

How do you calculate where to put a trailer axle?

Measure from the hitch to the loaded trailer’s center of gravity (A), then divide by the share of weight the axles should carry. For a 12% tongue weight that is B = A ÷ 0.88, which is the distance from the hitch to the center of the axle set.

What tongue weight percentage should a trailer have?

Dexter Axle recommends 10% to 14% of loaded trailer weight on the hitch for bumper-pull trailers and 15% to 20% for fifth wheel and gooseneck trailers. Nissan’s 2020 towing guide gives 10–15% and 15–25%.

What happens if the axle is too far forward?

Moving the axle forward, toward the trailer’s center of gravity, lowers tongue weight. Under about 10% on a bumper-pull trailer raises sway risk, and if the axle ends up in front of the center of gravity, the tongue lifts the hitch.

How do I calculate the weight on my trailer axle?

Use the lever rule: axle load = total weight × A ÷ B, where A is hitch to center of gravity and B is hitch to axle center. Tongue weight is the total weight minus the axle load.

Does the calculator split weight between tandem axles?

No. It gives the load on the whole axle group and compares it with the combined axle and tire ratings. How the load divides between tandem axles depends on the suspension and equalizers, and no verified axle-split method is used here.

Related guides

  • How Heavy Can a Trailer Be Without Brakes? State-by-State Weight Limits
  • Boat Trailer Winch Size Guide: Capacity by Boat Weight and Ramp Angle
  • Is a Trailer Breakaway Kit Required? Rules, Weights and How It Works
  • How to Measure a Trailer Axle: Hub Face, Spring Center and Capacity

More free tools

Ball Mount Drop and Rise Calculator

Enter receiver and coupler heights to calculate the required ball mount drop or rise in inches and millimeters.

Boat Trailer Parts Selector & Rating Checker

Enter your boat plus gear weight and the rating printed on each trailer part to see which parts are rated below your loaded weight.

Fifth Wheel / Gooseneck Pin Weight & Payload Checker

Estimate fifth wheel or gooseneck pin weight and check it, plus hitch, people and cargo, against your truck's door-jamb payload sticker.

See all free tools (14) →

  • Home
  • About Us
  • Contact Us
  • HTML SITEMAP
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclaimer
  • How We Research

Please keep in mind that we may receive commissions when you click our links and make purchases. However, this does not sway our reviews and comparisons. We try our best to keep things unbiased, in order to help you make the best choice. As Amazon Associate, we earn from qualifying purchases.

© 2026 TowPure | All Rights Reserved.

Scroll to top
  • Home
  • About Us
    • Contact Us
  • Receiver Hitches
  • Trailer Wiring
  • Trailer Tires
  • Hitch Carriers
  • Trailer Jacks
  • Free Tools
Search